GS-LI/B Low-intensity Single Aviation Obstruction Light
Obstruction light used in Tower Crane, Wind Turbine, High Mast,
Metallurgies, Towers(Telecom, GSM, Electric), Smokestacks,
High-rise Buildings and any other potentially hazardous
obstructions within 45 meters to air traffic with a steady burning
red safety light.
1.PC material with good impact protection strength, thermal
stability, high transmittance.
2.Bird spike against bird drop.
3.International-advanced cold LED with low power consumption, high
brightness and service life of light source reaching 100,000hours.
4.LED based on obstruction light last 15 times longer than
traditional light source, incandescent light.
5.About 96% less power than 116W incandescent light.
6.Major maintenance cost saving,Surge protection device inside
7.Strong corrosion resistance, Shock and Vibrations protection and
8.Dawn to Dusk operating: Built-in photocell can let light work
automatically at night, closed during the day.
9.3/4inch or 1inch installation size and small volume especially
being suitable for telecom and flag-pole installation way.
10.There is one switch converting between Flashing mode and
11.Five Years Warranty Period.
2.Standard: ICAO (Aerodromes Annex 14) Low-intensity Type A or Type
B and FAA L-810
3.Light intensity: ≥32.5cd(Option 10cd, 50cd, 80cd, 100cd)
4.Flash rate: Steady-burning mode or Flashing mode
5.Light source: LED
6.Service life of LED: ≥100,000hours
7.Operating voltage: AC220V (option voltage,eg. AC120V, AC110V,
8.Power consumption: 3W
9.Overall size(mm): 136 by 136 by 220
10.Installation size: 3/4inch or 1 inch
11.Vertical degree: ≥10°
12.Horizontal degree: 360°
-Base: die casting aluminum
15.Emitting color: Aviation red
16.Ambient temperature: -40℃~+70℃
17.Wind load: 80m/s
18.Protection standard: IP65